SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Hitch for Forklifts
Forklift Hitch - A tow hitch is an item that attaches to the vehicle's chassis. It is utilized for towing or could be connected as a tow-bar to a set of paired main gears or an aircraft nose. Hitches could take many forms. They can be in the form of a tow pin and jaw together with a trailer loop. This design is often utilized for agricultural applications with big vehicles where slack in the pivot pin enables swiveling and articulation. It could also take the form of a tow-ball in order to allow the same movements of a trailer. The towing pintle is one more category of hitches that is used on military vehicles internationally.
The ball mount enables the ball to be mounted to it while receiver hitches have ball mounts which are removable. The fixed drawbar hitch is one more kind of hitch. These types have integrated ball-mounts. It is important for the ball-mount to match the SAE hitch class. The ball-mount utilized in a receiver type of hitch is a rectangular bar that fits into a receiver that is attached to the motor vehicle. There are removable ball-mounts accessible which are designed with a varying rise or drop to be able to accommodate different heights of vehicles and trailers to allow for level towing.
In order to safely tow a load, it is vital to have the proper combination of vehicle and trailer. Needed is a proper loading on the tow-ball both horizontally and vertically. There are references and lots of advice accessible so as to avoid issues.
Outside North America, tow-ball vehicle mounts are known as the tow bracket. On all passenger vehicles, the mounting points are defined by the vehicle maker and the tow-bracket manufacturer. They need to make use of these mount points and prove the effectiveness of their bracket for each and every vehicle by completing a full rig-based fatigue check.
Several pickup trucks have outfitted on the rear bumper 1 to 3 mounting holes placed in the middle part. The application of these was in order to help accommodate tow-balls. The ones on the outermost right or left are typically used by drivers in rural areas who tow wide farm machinery on two lane roads. The far side mounting allows the trailer etc. being towed to be further away from the opposite side of the road.
Whenever utilizing the pickup truck's bumper for towing instead of a frame mounted hitch; individuals should utilize extreme caution since the bumper does not provide great strength. Towing using a bumper must be limited for lighter loads. The weight ratings for both frame mounted receiver hitches and bumper mounted hitches could be seen on the bumper of pickup trucks and on the receiver hitch. There are various pickup trucks with no frame mounted receiver hitches. These usually use the rear bumper, especially in instances when it is not a full size pickup.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Fayetteville, Arkansas
forkliftpartsfayetteville.com
Email Us
About Us